Nationwide service, United Kingdom info@forklifttrainer.co.uk +44 1943 498005
ForkliftTrainer.co.uk

Forklift operator training · nationwide

Competent operators. Safer sites. Fewer accidents.

Accredited-standard forklift training delivered on your premises, on your trucks, anywhere in the UK. Novice, conversion and refresher courses for every major truck type.

  • Follows HSE Approved Code of Practice L117
  • Training on your site, on your equipment
  • Certificates issued on successful completion

Why training matters

Forklifts are involved in around a quarter of all workplace transport injuries in the UK

Most incidents come down to a handful of causes: untrained or out-of-practice operators, overloaded trucks, poor pedestrian segregation and skipped daily checks. Every one of them is preventable, and every one of them appears in the HSE prosecutions we report on.

Under the Provision and Use of Work Equipment Regulations (PUWER) and the Approved Code of Practice L117, employers must make sure operators have received basic, specific job and familiarisation training before they drive a truck at work. A certificate of basic training is the evidence that inspectors and insurers ask for.

Why forklift accidents happen
3 to 5days for a novice course on one truck type
1 daytypical refresher or conversion course
3 to 5 yrsHSE recommended refresher interval
16+minimum operator age, supervised under 18

Start here

The guides everyone should read

All guides
Operators · 4 min read

The complete guide to forklift training in the UK

Who needs training, what the law actually says, how a course is structured, what the test involves and how long a certificate lasts. Everything an operator or employer needs before booking.

Read the guide
Operators · 3 min read

Forklift pre-use inspection: the daily checklist

The walk-around every operator should do at the start of a shift, what to look for at each point, and what to do when something is wrong. Printable checklist included.

Read the guide
Operators · 4 min read

Forklift stability, load centres and the capacity plate explained

Why forklifts tip over, what the stability triangle is, how the load centre changes what a truck can lift, and how to read the capacity plate before every unusual load.

Read the guide
Supervisors · 3 min read

Pedestrian safety around forklifts: segregation, rules and site design

Being struck by a forklift is the most common way people are killed by them, and most of the victims are pedestrians. How to separate people from trucks, and what to do where you cannot.

Read the guide
Supervisors · 2 min read

Forklift refresher training: when it is needed and what it covers

The HSE recommends refresher training every three to five years, but the interval is not the point. Here are the triggers that mean an operator needs retraining now, and what a good refresher looks like.

Read the guide
Operators · 3 min read

Working safely with pallet racking: stacking, de-stacking and rack damage

Racking collapses are rare but catastrophic, and almost always caused by forklift impact. How to place and retrieve loads at height, and how to spot damage before it matters.

Read the guide

Safety news

Latest articles

All articles
Safety tips

Forklift speed limits: how fast is too fast?

There is no national speed limit for forklifts. The truck's top speed, often 12 to 15 mph for a counterbalance, is set by the manufacturer, and the safe speed in any workplace is set by the employer.

Need operators trained or certificates renewed?

Tell us which trucks you run and where you are. We train on your site, on your equipment, anywhere in the UK.